Courses

Introduction to ACT Building Contract Disputes

Introduction to ACT Building Contract Disputes

This 2 hour information session will provide you with an understanding of the process available to you to deal with disputes and the options to

Understanding an ACT Building Contract

Understanding an ACT Building Contract

This course provides participants with the skills and knowledge to conduct any form of workplace testing and will provide a higher level of understanding of the process and formalities of testing for employers or employees requiring this information.

Work Safely at Heights

Work Safely at Heights

The aim of this course is to provide participants with information, tuition and activities that will enable them to identify, assess and safely work above 1.5 metres with fall protection where required.

Asbestos Awareness 10314NAT COURSE IN ASBESTOS AWARENESS

Asbestos Awareness 10314NAT COURSE IN ASBESTOS AWARENESS

The aim of this course is to provide participants with an awareness of the hazards and health effects of asbestos and its possible location in Canberra ACT homes and the community.

Asbestos Awareness and White Card for $295 or if you are eligible for the Training Fund Authority rebate you could pay as little as $150.00*

Asbestos Awareness and White Card for $295 or if you are eligible for the Training Fund Authority rebate you could pay as little as $150.00*

These two courses are mandatory for building and construction workers in the ACT to gain entry onto a construction site. MBA Group Training is offering these two courses as a combined deal for a limited time.

Bricklaying for the Sub-contractor

Bricklaying for the Sub-contractor

This course consisting of 11 sessions will provide the participant with the skills and knowledge to undertake minor bricklaying jobs professionally.

Bullying & Harassment

Bullying & Harassment

Bullying in the workplace can lead to serious psychological and/or physical health problems. This course aims to create awareness of the problems and their solutions.

Contribute to WHS hazard identification, risk assessment and risk control

Contribute to WHS hazard identification, risk assessment and risk control

This course provides participants with the skills and knowledge to identify WHS hazards, assessing WHS risk and developing, implementing and evaluating risk controls within their work area.

Course in Drug and Alcohol Testing - 10414NAT

Course in Drug and Alcohol Testing - 10414NAT

This course provides participants with the skills and knowledge to conduct any form of workplace testing and will provide a higher level of understanding of the process and formalities of testing for employers or employees requiring this information.

Elevating work platform operator's Card - operate Elevated Work Platform up to 11m

Elevating work platform operator's Card - operate Elevated Work Platform up to 11m

The aim of this course is to provide participants with information, tuition and activities that will enable students to operate Scissor and Boom type lifts.

Enter and Work in Confined Spaces

Enter and Work in Confined Spaces

The aim of this 2 day course is to provide participants with information, tuition and activities that will enable them to identify, assess and safely enter and work in a confined space.

Enter and Work in Confined Spaces Refresher

Enter and Work in Confined Spaces Refresher

The aim of this course is to provide participants with up to date information, tuition and activities that will enable them to identify, assess and safely enter and work in a confined space.

Erect and dismantle restricted height scaffolding

Erect and dismantle restricted height scaffolding

This course is particularly useful for construction industry personnel with minimal experience in erecting and dismantling scaffolding, who wish to further improve their skills and understanding.

Explosive Power Tools

Explosive Power Tools

This course is aimed at people within the building and construction trades who will be using Explosive Power Tools (EPT) in their work and those who are completing the requirements for a Certificate III Trade Certificate.

First Aid Training

First Aid Training

The aim of this 1 day course is to provide participants with the required knowledge and skills to provide first aid response and to perform cardiopulmonary resuscitation (CPR).

General Construction Induction (White Card)

General Construction Induction (White Card)

Current legislation requires all persons to complete General Induction Card training before entering a construction site.

Health and Safety Representative (HSR) Training

Health and Safety Representative (HSR) Training

The introduction to the Work Health and Safety Act 2011 places a duty on all Persons Conducting Businesses or Undertakings (PCBUs), regardless of size, to develop a consultative arrangement on all matters that directly affect work safety.

Health and Safety Representatives - Refresher Course

Health and Safety Representatives - Refresher Course

The introduction of the Work Health and Safety Act 2011 places a duty on all Persons Conducting Businesses or Undertakings (PCBUs), regardless of size, to develop a consultative arrangement on all matters that directly affect work safety.

Implement Traffic Control Guidance Plan - Refresher

Implement Traffic Control Guidance Plan - Refresher

To renew your Implement Traffic Management Plan accreditation in New South Wales, you will be required to successfully complete the Roads and Maritime Services approved training program.

Implement Traffic Control Guidance Plans

Implement Traffic Control Guidance Plans

This course provides training for staff that are required to set up and work with Traffic Control Plans (TCP). Note: This course does not qualify participants to select or modify existing TCPs or control traffic with a Stop/ Slow bat.

Introduction to Manual Handling

Introduction to Manual Handling

The aim of this training course is to provide participants with the knowledge and skills necessary to identify potential hazards, understand the associated risks and implement control measures to minimise their risks.

Licence to erect and dismantle scaffolding (Basic Level)

Licence to erect and dismantle scaffolding (Basic Level)

This 5 day course specifies the outcomes required to erect, alter and dismantle scaffolding at the basic level.

Licence to erect and dismantle scaffolding (Intermediate Level)

Licence to erect and dismantle scaffolding (Intermediate Level)

This course specifies the outcomes required to erect, alter and dismantle scaffolding at the intermediate level which includes the operation of cantilevered crane-loading platforms, cantilevered and spurred scaffolds, barrow ramps and sloping platforms.

Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

This 3 day training program covers the requirements to operate an Elevated Work Platform safely with the knowledge and confidence to apply for a High Risk Work Licence Class - WP.

Licence to operate a forklift truck

Licence to operate a forklift truck

The 3 day Forklift Training Course is designed to provide participants with the ability to operate a forklift safely and equip them with the knowledge and confidence to apply for a High Risk Work Licence (HRWL).

Licence to operate a materials hoist

Licence to operate a materials hoist

This 2 day course course is specifically designed for Materials Hoist operators. The category HM course does not allow operating personnel hoists.

Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)

The Non-Slewing Mobile Crane Training Course run over 6 evening sessions is designed to provide participants with the ability to operate a non-slewing mobile crane safely and equip them with the knowledge and confidence to obtain a National High Risk Work

Licence to operate a slewing mobile crane (up to 20 tonnes)

Licence to operate a slewing mobile crane (up to 20 tonnes)

This course run over 8 evening sessions is designed to provide participants with the ability to operate a slewing mobile crane (up to 20 tonnes capacity) safely and equip them with the knowledge and confidence to apply for a High Risk Work Licence Class C

Licence to operate a slewing mobile crane (up to 60 tonnes)

Licence to operate a slewing mobile crane (up to 60 tonnes)

This course, run over 8 evening sessions is designed to provide participants with the ability to operate a slewing mobile crane (up to 60 tonnes capacity) safely and equip them with the knowledge and confidence to apply for a High Risk Work Licence Class

Licence to operate a vehicle loading crane

Licence to operate a vehicle loading crane

This course running over 6 evening sessions is designed for participants to gain the necessary skills to operate a vehicle loading crane with a capacity of 10 metre tonnes or more, mounted on a vehicle for the principal purpose of loading and unloading su

Licence to perform dogging

Licence to perform dogging

This 5 day licence to perform dogging - CPCCLDG3001A training course is designed for participants to gain the necessary skills to plan, prepare and complete dogging work.

Licence to perform rigging (basic)

Licence to perform rigging (basic)

This 5 day training program covers the outcomes required to perform basic rigging work associated with the movement of plant and equipment.

Licence to perform Rigging (intermediate)

Licence to perform Rigging (intermediate)

This 5 day training program covers the outcomes required to perform rigging work at the intermediate level.

Prepare Work Zone Traffic Management Plans

Prepare Work Zone Traffic Management Plans

This 2 day course provides participants with the theory and practical skills required to prepare both non-complex and high-risk (complex) Traffic Management Plans, in accordance with the planning level specified in clause 2.2.1(c) of AS1742 Part 3 - 2009

Remove Friable Asbestos

Remove Friable Asbestos

This 2 day course provides participants with the knowledge and skills required to remove friable asbestos containing material (ACM).

Remove Non-Friable Asbestos

Remove Non-Friable Asbestos

This 2 day course provides participants with the knowledge and skills required to remove non-friable asbestos containing material (ACM).

Supervise Asbestos Removal

Supervise Asbestos Removal

This course provides participants with the knowledge and skills required to supervise the removal process for friable and non-friable asbestos containing material (ACM).

Traffic Controller

Traffic Controller

This course provides training for staff who are required to control traffic with stop-slow bat. This course aims to provide participants with the knowledge and skills to perform traffic control safety for their co- workers and the public.

Traffic Controller - Refresher

Traffic Controller - Refresher

To renew your traffic controller accreditation in New South Wales, you will be required to successfully complete the Roads and Maritime Services approved training program and demonstrate current competence as a traffic controller.